WHAT IS LASER MARKING/ENGRAVING?
 
     
 
LASER is an acronym which stands for Light Amplification by Stimulated Emission of Radiation. The energy generated by the laser is in or near the optical portion of the electromagnetic spectrum. Energy is amplified to extremely high intensity by an atomic process called stimulated emission. The term "radiation" is often misinterpreted because the term is also used to describe radioactive materials or ionizing radiation. The use of the word in this context, however, refers to an energy transfer. Energy moves from one location to another by conduction, convection, and radiation. The color of laser light is normally expressed in terms of the laser's wavelength. The most common unit used in expressing a laser's wavelength is a nanometer (nm). There are one billion nanometers in one meter.
  
     
 

How does it work ?

  
 

A laser marking system creates marks on uncoated substances by removing material, or by producing a color change in the material due to thermal effects, which will then contrast with the surrounding material. The mark is produce by the rapid increase of temperature on the surface of the material. This is a combination of the transformation of light energy into heat energy when the workpiece absorbs incident laser light, and the short laser pulses (less than a millionth of a second) which cause material removal or for the discoloration. Because this process happens quickly, the heat does not spread to the surrounding material.


  
 

What can be marked ?

  
 

Any flat surface or moderately curved surface can be laser marked. Cylindrical surfaces can also be marked but special clamping or rotational jigs are necessary.

Materials that can be marked include:

  
     
 

METALS: Aluminum, Tantalum, Titanium, Ferrous Metals, Silver and Bronze

 
  PLASTICS: ABS, Mylar, Polycarbonate, Polyethylene, Polypropylene, Polystyrene, PVC  
  OTHER: Glass, Wood, Leather
 
     
  What are the advantages of laser marking ?
  
     
 
  • It is a non-contact process - there is no tool wear
  • Marks are permanent
  • The process is free of contamination (Unlike ink or dye printing, or chemical etching)
  • Inaccessible places can be reached
  • It is usually faster than competing processes
  • The process can easily be automated
  • It is extremely flexible because the system is computer controlled - modifications can be achieved by a few clicks of a mouse button
  • Excellent legibility and resolution - line thickness of 100 microns can be achieved
  • Cost effective - no retooling requirements, low maintenance, low operational costs
  • Easy to integrate into production systems.


 
     
 
electron beam welding | resistance tack welding | laser marking | laser engraving | laser cutting | Citric Passivation | Links | Site Map
ALL RIGHTS RESERVED. No part of this website may be reproduced or utilized in any form or by any means, electronic or mechanical including photocopying, recording, or by informational storage and retrieval system without permission from C S Industries. Any violation will be prosecuted to the full extent of the law.
Copyright © 2006 [C S Industries LLC]. All rights reserved.
Designed By: Paramount Webmasters